Do not heat, disassemble nor dispose into fire.
The insulation materials may cause fire, heat generation, leakage or even
bursting.

Do not short Circuit
If the (+) and (-) come into contact with any metal materials, a short-
circuit might occur. As a result, fire, heat generation, leakage or bursting
may occur.

Keep batteries out of children’s reach
When storing the batteries, please keep the batteries out of children’s
reach. If a battery is swallowed, consult a physician immediately.

If the battery alkaline liquid leaked and gets into the eyes, do not rub
them, rinse your eyes with clean water and consult a physician
immediately.

If the battery alkaline liquid leaks and spills onto clothing, to protect from irritation, remove and wash them with clean water immediately.

CAUTION
• Do not use or expose the batteries to direct sunlight or in areas with
high-temperatures.
• Avoid exposing the batteries to any form of liquids.
• In case of disposal, please insulate between the (+) and (-) poles of
the battery by using an insulating material. (i.e. Natural fibers,
Polystyrene)

• X-PHY® Secured Laptop or PC
• Valid email account, password and OTP (2FA) authenticator
• Stable Internet Connection
• Minimum Microsoft Windows 10 / 11.
• An IOS/Android Mobile Device.

Downloading of the application

Download and Install the X-PHY® PC Application:

X-PHY® PC Application (Windows 10/11)

Dashboard displays general disk information, including number of partitions, free space, used space, product name, serial number, firmware version, and etc.

Events

The event page contains the history of events stored in the firmware of the X-PHY®SSD to serve as an audit trail. The event log table contains information such as the Serial Number, Event Info, Time Stamp, Username, MAC address and IP Address.

Configuration

The configuration page has two sections: Security features and General settings.

Security Features

It is recommended to turn on the main security features in this section to ensure that the device is totally protected.
The main security features include ransomware, cloning, temperature, physical, ambient, email alert.

Ransomware – Prevents ransomware attacks by locking down the drive.

Cloning – Prevents cloning attacks by locking down the drive.

Temperature – Prevents temperature attacks by locking down the drive.

Physical – SSD removal protection.

Ambient – CPU ambient/cabinet open protection.

Email Alert – Email notification for all events.

Wipe Data – The data on the drive will be completely erased if a physical disconnect is detected.

Important Note: Every time a Security Feature is changed, you will need to type in your password and six digit OTP code.

General Settings

Password, registered email, and authenticator can be changed from this section.

Configuration Reset – This button can be used to reset all settings. Configuration Reset is similar to a factory reset. After activating this feature, the user will be required to go through the entire registration process once again.

Rapid Purge – This button can be used to erase all data including the operating system on the drive at the physical block layer.

USE WITH CAUTION

Important Note: Every time a setting in General Settings is changed, you will need to type in your password and six digit OTP code.

The X-PHY Connect App is used to unlock your X-PHY SSD Drive.

Step 1: Tap on the Bluetooth Button to find X-PHY SSD devices.

Step 2: Your X-PHY SSD will show up under “Devices found”, click on the device name then click the “Pair devices” button.

*Note: Bluetooth and location access must be enabled to pair

Step 3: Once Paired, you will be able to see the Event Logs and unlock your X-PHY SSD.

Gather Necessary Tools:

X-PHY SSD (ensure compatibility with your laptop)

Small Phillips-head screwdriver (if required)

Prepare Your Laptop:

Power off your laptop completely.

Disconnect any external power source and remove the battery (if applicable).

Open the case of your laptop if necessary to access internal components.

Locate the M.2 Slot:

Consult your laptop’s manual or the manufacturer’s website to find the location of the M.2 slot.

Typically, it’s located beneath a panel on the bottom of the laptop.

Ground Yourself:

Before proceeding further, ground yourself by touching an unpainted metal surface. This is an extra safeguard that protects your drive and components from static damage during the installation process.

Access the M.2 Slot:

Unscrew and remove the drive using the M.2 slot if applicable.

Ensure you’re accessing the correct panel if your laptop has multiple compartments.

Insert the X-PHY SSD:

Align the notches on the SSD with the key in the M.2 slot.

Gently insert the X-PHY SSD into the slot at a 30-45 degree angle.

Press down firmly until the X-PHY SSD is seated properly.

Secure the X-PHY SSD:

If your laptop has a retaining screw, use it to secure the X-PHY SSD in place.

Ensure the X-PHY SSD is firmly seated and doesn’t move around.

Replace the Panel:

Carefully replace the panel covering the M.2 slot.

Tighten the retaining screw to secure the panel in place.

Reassemble Your Laptop:

Reinsert the battery (if removed) and reconnect any external power source.

Power on your laptop and proceed to install an OS on the X-PHY SSD or proceed to install the X-PHY PC application if using as a secondary drive.

Desktop Installation:

Gather Necessary Tools:

X-PHY SSD (ensure compatibility with your desktop)

Small Phillips-head screwdriver (if required)

Prepare Your Desktop:

Power off your desktop completely.

Disconnect the power cable and any connected cables.

Locate the M.2 Slot:

Find the M.2 slot on your desktop motherboard.

Refer to your motherboard manual or the manufacturer’s website for its location.

Prepare the Motherboard:

If there’s a standoff pre-installed for the M.2 slot, leave it as is.

If not, install the standoff provided with your motherboard into the appropriate mounting hole.

Ground Yourself:

Ground yourself by touching an unpainted metal surface. This is an extra safeguard that protects your drive and components from static damage during the installation process.

Insert the X-PHY SSD:

Align the notches on the X-PHY SSD with the key in the M.2 slot.

Gently insert the X-PHY SSD into the slot at a 30-45 degree angle.

Press down firmly until the X-PHY SSD is seated properly.

Secure the X-PHY SSD:

If your motherboard has a retention mechanism, use it to secure the X-PHY SSD in place.

If not, use a small screw to secure the X-PHY SSD to the standoff on the motherboard.

Reassemble Your Desktop:

Reconnect any cables that were disconnected earlier.

Reconnect the power cable and any peripherals.

Power on your desktop and access the BIOS/UEFI to verify the X-PHY SSD is detected.

Initialize the X-PHY SSD:

Power on your Desktop and proceed to install an OS on the X-PHY SSD or proceed to install the X-PHY PC application if using as a secondary drive.

Final Steps:

Enjoy the enhanced security and performance provided by your new X-PHY SSD!
Consider configuring security features and other settings using the X-PHY PC application for added protection and customization.

If you encounter any issues, refer to the X-PHY PC application guide or seek assistance from the X-PHY support team.

Download and Install the X-PHY® PC Application:

X-PHY® PC Application (Windows 10/11)

Step 1: Click on the “Install” button.

(Note: click Options for more selections if required *IT IS HIGHLY RECOMMENDED to leave the default options.)

Step 2: Wait for installation to complete.

Step 3: Click Launch X-PHY® PC Application to proceed.

Step 4: Download and install the X-PHY Connect app on the Android Play Store or iOS Store